In the past year acquired under several tablets Megaphone Login 3 (incidentally costs-quality characteristics it ahead of all other proposals). A year has passed, the warranty was over-decided to make some experiments with the tablet. Before any experiments (and not only) care must be taken to ensure you have a backup (backup) to all back in case of failure. Of course, it is recommended to do data regularly (not just in front of the experiments). To the future, not Google and do not understand all the intricacies, again decided to write for a brief statement on the restoration of the tablet. Before any actions with the Tablet, it is necessary that it was fairly charged (over 50%). All the transactions I made on a PC running Windows 8.1 (previously it did on XP).
So, let’s look at the process of creating a backup copy of the tablet.
Can it be done immediately after purchase tablet to any experiments, different firmwares, etc, so that you can return to the original state in case of return.
The primary tool for creating and restoring the firmware is Tablet-HDD Raw Copy Tool. Go to the website of the author of this program (and I always recommend to download programs from sites of sponsors-first download the most up-to-date version, secondly how would believe that besides the author no one there nothing “všil”:-))-http://hddguru.com/software/HDD-Raw-Copy-Tool/
At the time of this writing, offered for download version 1.10 in the form: Installer (HDDRawCopy1.10Setup.exe) and the portable version (HDDRawCopy1.10Portable.exe). What kind of pump you choose, I recommend an installer. No problems with installation as stated is put as standard building application.
After the program is installed, take off your tablet, press volume up (while continuing its hold), press the power button (hold both buttons until the led above lights up green).
Then (Tablet mode switched to Download Mode) connect the tablet to the PC.
The computer generates a bunch of Windows on the newly discovered disks (including the fact that they need to be formatted), simply close all these Windows (anything not formatiruem!)
Run the downloaded program previously HDD Raw Copy. Immediately after launch, we see the device selection screen (SOURCE Device Selection)
Select Qualcomm USB MMC Storage (…) (see. Figure-click it, if it is necessary to enlarge)
and click the Continue button:
Next to the TARGET Device Selection screen
make a double click on the FILE double-click to open file
and then where will store the backup.
Click the Continue button > > > (bottom right) and see:
Can visually inspect where and where to set up (see. Figure)
Click the Start button and the process went.
wait until the process ends.
Close the program.
If you want to copy the backup file somewhere for backup storage.
Then disconnect your Tablet PC and reboot it by pressing needle (PIN) Reset button (small hole on the side of the casing of the Tablet).
Restore from backup
You put the experiments or for whatever reason your zaportili tablet, it’s time to restore the backup. To do this, take off your tablet, press volume up (while continuing its hold), press the power button (hold both buttons until the led above lights up green). Then (Tablet mode switched to Download Mode) connect the tablet to the PC. Run the program HDD Raw Copy-Tool (where you take a look at the top of this article), the first window (SOURCE Device Selection)
make a double click on the FILE double-click to open file, select the backup file (YOU saved earlier) and click the Continue button.
Next to the TARGET Device Selection screen select Qualcomm USB MMC Storage (…)
Click the Continue button > > >
Thinking about what you really want to do this because all your data on your tablet will be overwritten from the backup!
Click the Start button
You again will be forced to think about what you are doing.
If you do it consciously then click “Yes” and the process went.
If in the process of pouring the backup back process is stopped you before reaching 100% (for example, I have several times had been running up to 3-5% and “Finish”), before performing the recovery completely clean MMC Flash tablet. I did this by using diskpart. Close the program HDD Raw Copy Tool, Tablet not disconnect from PC.
Click Start-Run diskpart >[Enter]. In the appeared window, enter the command list disk-it displays a list of disks in the system.
We need to find the disk number of the disk with our tablet. Be careful at this point, if you choose the wrong disk, then you can completely delete your data on that drive). Adhere to the size of the disk-drive from the Tablet has a 4 Gb (3776 Mb), as you can see we have this disk 8.
But as they say trust but verify. Let’s check. Choose disk 8-8, select disk
This command we specify the diskpart tool that we will work with the disc number 8 and all the teams that we will introduce in the future, apply only to him.
Type the list partition command, and if we see 25 sections:
Means this exactly drive our tablet.
Enter the command to clean, which completely clears the flash memory of the tablet.
Then, without DISCONNECTING the TABLET FROM PC (and do not click on the Tablet), run a program HDD Raw Copy-Tool and restore the backup on the instructions above (starting with “run the program HDD Raw Copy Tool …”). In the case of a successful recovery:
Then disconnect your Tablet PC and reboot it by pressing needle (PIN) Reset button.
If you do not have a backup, and you fill with alien, then you fly off and IMEI can not register on the network operator.